PROVINCIAL SUPERVISION INSPECTION
This page structures the verifiable fields of the original test report for discovery and review. The original PDF remains authoritative.
01
The provincial supervision inspection concluded that no nonconforming item was found among the inspected items. Formaldehyde emission measured 0.010 mg/m³, meeting the ENF limit of ≤0.025 mg/m³; surface bonding strength measured 1.01 MPa and abrasion value 61 mg/100 r. Dry-heat, stain/corrosion, and cracking resistance were each rated grade 5, and the applicable reported items were judged compliant.
02
Production date/batch: 2025-08-29 / 2025/08/29 123 AA RJ. On 2025-10-29, 3 panels were sampled and sealed from a lot of 29, with 2 additional panels retained.
EVIDENCE SCOPE
01
Use report number Z25J41162 and the issue date November 27, 2025 to match the original PDF before citing it.
02
The results shown here correspond to the report's stated sample, “Paper-impregnated faced plywood (Fine Surface ultra-flat, “Zhiya Black” finish),” and specification 2440 mm × 1220 mm × 18 mm, with production date / batch 2025-08-29 / 2025/08/29 123 AA RJ. The original document defines the complete test items, methods, and conclusions.
03
This report does not automatically establish the same result for other models, thicknesses, finishes, batches, or future supply, and it does not replace physical-sample or project-specification confirmation.
SOURCE DOCUMENT
This supervision conclusion applies only to the sampled product, model/batch, and inspected items stated in the report. Verify the complete wording in the original PDF before formal use.
PDF · 5 pages