Finished Decorative Panel Test Reports

Key test results

The report gives a “pass” conclusion for items 1–19. Formaldehyde emission measured 0.015 mg/m³; benzene, toluene, xylene, and TVOC were not detected.

Key test results

The report gives a “pass” conclusion for items 1–19. Formaldehyde emission measured 0.012 mg/m³; benzene, toluene, and xylene were not detected, while TVOC measured 60.4 μg/m³.

Key test results

The report gives a “pass” conclusion for items 1–14. Formaldehyde emission measured 0.016 mg/m³; benzene, toluene, and xylene were not detected, while TVOC measured 50.9 μg/m³.

Key test results

The provincial supervision inspection concluded that no nonconforming item was found among the inspected items. Formaldehyde emission measured 0.010 mg/m³, meeting the ENF limit of ≤0.025 mg/m³; surface bonding strength measured 1.01 MPa and abrasion value 61 mg/100 r. Dry-heat, stain/corrosion, and cracking resistance were each rated grade 5, and the applicable reported items were judged compliant.